1. Home
  2. /
  3. HDPE100+ Plastic Pipes Hydraulic Butt Welding Machines
  4. /
  5. CNC Butt Welding Machines
  6. /
  7. CNC W400 PLASTIC PIPE MONO PHASE HYDRAULIC BUTT WELDING MACHINE
CNC Butt Welding Machines

CNC W400 PLASTIC PIPE MONO PHASE HYDRAULIC BUTT WELDING MACHINE

  • Machine is for weldings of PE – PP – PVDF pipes and fittings up to 32 Bar Welding sizes are 160 – 180 – 200 – 225 – 250 – 280 – 315 – 400 mm
  • With the shortest setup time it provides simple and fast welding operations according to international standards ISO 12176 – 1
  • With it’s lightweight nature provides easy handling
  • Maximum working pressure is 150 Bar
  • The working environmental temperature is -10 C° ~+40 C°

CNC W400 Single Phase Butt Welding Machine Body

The main body supports the plastic pipes to be welded with two movable and two fixed clamps on it, and provides fixing and centering. Hydraulic pressure force is applied to the system. With two pistons on the carrier shaft, this force directs the movable clamps back and forth and provides the movement required for the welding process to take place.

CNC W400 Single Phase Butt Welding Machine Trimmer

It is an element of the butt welding machine that cleans the frontal area of the pipes fixed and centered on the main body with the two rotary blades on the right and left sides and the cutter blades on these blades before the heating process. The rotary motion of the trimmer is provided by the motor and reducer group on it. CNC W400 Butt Welding Machine trimming unit creates burr-free and parallel pipe surfaces.

CNC W400 Single Phase Butt Welding Machine Heater

It is the element of the butt welding machine that prepares the pipe face surfaces, which are brought to the desired roughness by the shaving process, for the joining process by heating them with the heating plate. The temperature adjustment of the heater is made with the digital temperature adjustment thermostat located on the heater plate.

CNC W400 Single Phase Butt Welding Machine Hydraulic and Electrical Control Unit

Electric and hydraulic control unit; the electricity required for the operation of the machine, the heater and the razor and the hydraulic pressure to the main machine; The control unit is operated by means of a hand control. There are four buttons and a switch on the hand control. The buttons move the movable clamps forward and backward and the switch activates the shaver.

CNC W400 Butt Welding Machine Enclosure Box

Housing and support box prevent heat loss from the heater. The trimmer protects against external influences (impact, water, etc.) by supporting the heater.

Similar Products

 

Menu